China factory High-Performance Easy Operation Multifunction Dog Food Making Machine Line Twin Screw Extruder wholesaler

Product Description

Gerneral Characture of XINDA’s Co-rotating Twin Screw Extruder/Plastic Extruder

Modular construction

XINDA’s twin screw extruder/Plastic Extruder are built on a modular system. Screw elements with different length and function
are mounted to the main splined shaft. The screw combination are changeable. Thus, with a few screw elements and barrel variation, different processing tasks can be finished on the same machine. Besides,when part of screw element,liner or barrel wear out, we only need to replace the broken parts instead of replacing the whole screw or barrel. Maintenance cost saves!

Temperature Separately controlled
The modular principle of the barrel permits precise sequencing for each application. Each barrel section’s temperature can be set separately. Normally,electrical heaters provide heating, cooling is obtained with water. Barrels, as well as screw and kneading elements are made out of nitride steel in the standard version; the wear resistant version is made of suitable materials, corresponding to the respective requirements. 

Standard barrels
The freely selectable order of screw elements assure the process sections mating the process configuration. Thus, different process zones can be set up interchangeably, according to the requirements for: Conveying;Kneading; Mixing and shearing; Homogenizing; Degassing; Pressure building.

XINDA’s Patent Design!!! Clamshell Barrel 

 

 

The barrel of twin screw extruder can be opened in minutes.This makes product changeover, maintenance and research fast and easy.

 

Model No.

(Clamshell Barrel)

PSHJ-20

PSHJ-35

PSHJ-50

PSHJ-65

PSHJ-75

PSHJ-95

Model No.

(Fixed Barrel)

SHJ-20

SHJ-35

SHJ-50

SHJ-65

SHJ-75

SHJ-95

Screw Diameter

(mm)

21.7

35.6

50.5

62.4

71

91

Central Distance

(mm)

18

30

42

52

60

78

L/D

28-52

28-52

28-52

28-52

28-52

28-52

Motor Power

(KW)

4-5.5

22-45

75-110

110-185

160-280

180-335

Max.Screw Speed:

(rpm)

600

600

600

600

600

600

Output Torque per Shaft 

(N.m)

32-43

175-358

597-875

875-1472

1273-2228

1432-2825

Reference Output   (kg/h)

1-20

20-80

50-200

150-350

300-600

600-1500

Standard Length Splined Shafts

Standard Length Splined Shafts are made from Mild Steel and are perfect for most repair jobs, custom machinery building, and many other applications. All stock splined shafts are 2-3/4 inches in length, and full splines are available in any length, with additional materials and working lengths available upon request and quotation. CZPT Manufacturing Company is proud to offer these standard length shafts.
splineshaft

Disc brake mounting interfaces that are splined

There are 2 common disc brake mounting interfaces, splined and center lock. Disc brakes with splined interfaces are more common. They are usually easier to install. The center lock system requires a tool to remove the locking ring on the disc hub. Six-bolt rotors are easier to install and require only 6 bolts. The center lock system is commonly used with performance road bikes.
Post mount disc brakes require a post mount adapter, while flat mount disc brakes do not. Post mount adapters are more common and are used for carbon mountain bikes, while flat mount interfaces are becoming the norm on road and gravel bikes. All disc brake adapters are adjustable for rotor size, though. Road bikes usually use 160mm rotors while mountain bikes use rotors that are 180mm or 200mm.
splineshaft

Disc brake mounting interfaces that are helical splined

A helical splined disc brake mounting interface is designed with a splined connection between the hub and brake disc. This splined connection allows for a relatively large amount of radial and rotational displacement between the disc and hub. A loosely splined interface can cause a rattling noise due to the movement of the disc in relation to the hub.
The splines on the brake disc and hub are connected via an air gap. The air gap helps reduce heat conduction from the brake disc to the hub. The present invention addresses problems of noise, heat, and retraction of brake discs at the release of the brake. It also addresses issues with skewing and dragging. If you’re unsure whether this type of mounting interface is right for you, consult your mechanic.
Disc brake mounting interfaces that are helix-splined may be used in conjunction with other components of a wheel. They are particularly useful in disc brake mounting interfaces for hub-to-hub assemblies. The spacer elements, which are preferably located circumferentially, provide substantially the same function no matter how the brake disc rotates. Preferably, 3 spacer elements are located around the brake disc. Each of these spacer elements has equal clearance between the splines of the brake disc and the hub.
Spacer elements 6 include a helical spring portion 6.1 and extensions in tangential directions that terminate in hooks 6.4. These hooks abut against the brake disc 1 in both directions. The helical spring portion 5.1 and 6.1 have stiffness enough to absorb radial impacts. The spacer elements are arranged around the circumference of the intermeshing zone.
A helical splined disc mount includes a stabilizing element formed as a helical spring. The helical spring extends to the disc’s splines and teeth. The ends of the extension extend in opposite directions, while brackets at each end engage with the disc’s splines and teeth. This stabilizing element is positioned axially over the disc’s width.
Helical splined disc brake mounting interfaces are popular in bicycles and road bicycles. They’re a reliable, durable way to mount your brakes. Splines are widely used in aerospace, and have a higher fatigue life and reliability. The interfaces between the splined disc brake and BB spindle are made from aluminum and acetate.
As the splined hub mounts the disc in a helical fashion, the spring wire and disc 2 will be positioned in close contact. As the spring wire contacts the disc, it creates friction forces that are evenly distributed throughout the disc. This allows for a wide range of axial motion. Disc brake mounting interfaces that are helical splined have higher strength and stiffness than their counterparts.
Disc brake mounting interfaces that are helically splined can have a wide range of splined surfaces. The splined surfaces are the most common type of disc brake mounting interfaces. They are typically made of stainless steel or aluminum and can be used for a variety of applications. However, a splined disc mount will not support a disc with an oversized brake caliper.

China factory High-Performance Easy Operation Multifunction Dog Food Making Machine Line Twin Screw Extruder     wholesaler China factory High-Performance Easy Operation Multifunction Dog Food Making Machine Line Twin Screw Extruder     wholesaler