उत्पाद वर्णन
Efficient MLT-YK3120 Direct Drive Six-Axis CNC Gear Hobbing Machine
The same quality, lowest price; same price, best quality.
| Description | Parameter | ||
| Processing Capacity
| Control the number of axes Axis | 6 | |
| Gear Type | Cylindrical spur gear, helical gear, worm gear, sprocket, drum teeth, taper teeth And other tooth parts | ||
| Machining Accuracy | Mass production grade 7 (GB/T10095-2008) | ||
| Workpiece Workpiece
| Max machined diameter | 200mm | |
| Min machining Module | The 0.5 mm | ||
| Max machining Module | 4mm | ||
| Max machining Length | 250mm | ||
| Cut teeth Number | 4 or higher | ||
| Cutter Tool | Maximum hob speed | 2000 r/min | |
| Maximum length of hob | 120mm (27,32 tool bar can hold 150mm length hob) | ||
| Maximum outside diameter of hob | 100mm | ||
| Dia of changeable center axis which assemble hobbing cutter | 22,27,32 | ||
| Tool Position Accuracy | ≤5um | ||
| Hob Shifting Travel | 150mm | ||
| Hob shifting | Auto | ||
| शाफ़्ट | Hob Head Swing Angle | Plus or minus 45 ° | |
| Turntable | Z-Slide Travel | 300mm | |
| Turntable Dia | 250mm | ||
| Turntable Max. RPM | 200RPM | ||
| Machine Power Power | Main Motor Power Main motor power | 18kw | |
| Total machine Power Total Power | 35kw | ||
| Size & Weight | Total Floor Space (L*W*H) | 2400 * 2000 * 2600 | |
| Machine Weight Machine weight | 6000Kg | ||
Processing Object:
Cylindrical spur gear, helical gear, worm gear, sprocket, drum teeth, taper teeth
And other tooth parts
Technical description
MLT-YK3120 CNC high speed gear hobbing machine is an excellent domestic vertical gear hobbing machine. Carefully developed by MLT and with fully independent core technology.
Remark: Picture shown as 4 axis machine
MLT-YK3120 high speed six-axis CNC hobbing machine is our company carefully developed and has completely independent core technology of excellent domestic CNC direct drive hobbing machine, the machine integrates the advantages of modern CNC automatic CNC technology, the use of direct drive B C axis, with high speed, high precision and high torque and excellent dynamic response performance, Compared with other equipment of the same type, it has the characteristics of high machining precision, high processing efficiency and good accuracy retention. Can be processed straight teeth, bevel teeth, small taper, drum and other gears, can easily achieve 45° tooth shape processing. Can be processed spline, less teeth gear and other special gear. With 2 precision rolling tool setting device. Supports dry cutting.
Service item:
1. Machine warranty period: 12 months once the customer receives machine, after 12 months, we may answer the customer’s question on line or by e-mail within 24 hours
2. CZPT will prepare 1 more set of quick-wear components with the machine for the customer
3. CZPT will not provide or change any part or component for free if the customer damages them abnormally, customer needs to purchase them separately
4. CZPT will afford the customer’s technician local transportation, accommodation and catering cost when the customer’s technician comes to CZPT factory to have a train or inspects the machine before the machine delivery and the customer will afford their technician travelling cost
5. In the warranty period, if the customer requests CZPT engineer to support in foreign country, CZPT will supports to check equipment and train the customer technician for free but the customer needs to afford Mltor’s engineer travelling expenses, local transportation and accommodation and catering cost
| बिक्री पश्चात सेवा: | 12 Month |
|---|---|
| वारंटी: | 12 Month |
| आवेदन पत्र: | Gear |
| Process Usage: | Gear Hobbing |
| Movement Method: | Linear Control |
| Control Method: | Open-Loop Control |
| उदाहरण: | US$ 49.99/Piece 1 पीस (न्यूनतम ऑर्डर) | |
|---|
| अनुकूलन: | उपलब्ध | अनुकूलित अनुरोध |
|---|
स्प्लाइन शाफ्ट के क्या फायदे हैं?
यदि आप अपनी मशीन के लिए सही स्प्लाइन शाफ्ट की तलाश कर रहे हैं, तो आपको कुछ महत्वपूर्ण बातें जाननी चाहिए। सबसे पहले, किस प्रकार की सामग्री का उपयोग किया जाना चाहिए? स्टेनलेस स्टील आमतौर पर सबसे उपयुक्त विकल्प होता है, क्योंकि यह कम शोर करता है और इसमें थकान के कारण विफलता की संभावना कम होती है। दूसरे, इसे स्लॉटिंग या शेपिंग मशीन से आकार दिया जा सकता है। अंत में, यह सुचारू गति सुनिश्चित करता है। तो, स्प्लाइन शाफ्ट के क्या फायदे हैं?
स्प्लाइन शाफ्ट के लिए स्टेनलेस स्टील सबसे अच्छी सामग्री है।
स्प्लाइन शाफ्ट चुनते समय, आपको इसकी कठोरता, गुणवत्ता और फिनिश पर विचार करना चाहिए। स्टेनलेस स्टील में जंग और घिसाव प्रतिरोधकता बेहतर होती है। कार्बन स्टील भी स्प्लाइन शाफ्ट के लिए एक अच्छा विकल्प है। कार्बन स्टील में कार्बन की मात्रा कम होती है (लगभग 1.71 TP3T), जिससे यह अधिक लचीला होता है और सुचारू गति सुनिश्चित करने में मदद करता है। लेकिन अगर आप स्टेनलेस स्टील पर इतना पैसा खर्च नहीं करना चाहते हैं, तो अन्य विकल्पों पर विचार करें।
There are two main types of splines: parallel splines and crowned splines. Involute splines have parallel grooves and allow linear and rotary motion. Helical splines have involute teeth and are oriented at an angle. This type allows for many teeth on the shaft and minimizes the stress concentration in the stationary joint.
हाइड्रोलिक सिस्टम, ड्राइवट्रेन और मशीन टूल्स में बड़े, समान दूरी पर लगे स्प्लाइन का व्यापक रूप से उपयोग किया जाता है। ये आमतौर पर कार्बन स्टील (CR10) और स्टेनलेस स्टील (AISI 304) से बने होते हैं। यह सामग्री टिकाऊ होती है और ISO 14-B (पूर्व में DIN 5463-B) की आवश्यकताओं को पूरा करती है। स्प्लाइन शाफ्ट आमतौर पर स्टेनलेस स्टील या C45 स्टील से बने होते हैं, हालांकि कई अन्य सामग्रियां भी उपलब्ध हैं।
Stainless steel is the best material for a splined shaft. This metal is also incredibly affordable. In most cases, stainless steel is the best choice for these shafts because it offers the best corrosion resistance. There are many different types of splined shafts, and each one is suited for a particular application. There are also many different types of stainless steel, so choose stainless steel if you want the best quality.
उच्च गुणवत्ता वाले स्प्लाइन शाफ्ट की तलाश करने वालों के लिए, CZPT स्प्लाइन शाफ्ट कई लाभ प्रदान करते हैं। ये लागत कम कर सकते हैं, स्थितिगत सटीकता में सुधार कर सकते हैं और घर्षण को कम कर सकते हैं। CZPT TFE कोटिंग के साथ, स्प्लाइन शाफ्ट ऊर्जा और गर्मी के संचय को कम कर सकते हैं और आपके उत्पादों का जीवनकाल बढ़ा सकते हैं। साथ ही, इन्हें स्थापित करना भी आसान है – आपको बस इन्हें लगाना है।
ये कम शोर, कम घिसाव और थकान के कारण होने वाली विफलता को कम करते हैं।
The splines in a splined shaft are composed of two main parts: the spline root fillet and the spline relief. The spline root fillet is the most critical part, because fatigue failure starts there and propagates to the relief. The spline relief is more susceptible to fatigue failure because of its involute tooth shape, which offers a lower stress to the shaft and has a smaller area of contact.
स्प्लाइन शाफ्ट की थकान जीवन का निर्धारण एसएन वक्र को मापकर किया जाता है। इसे वोहलर वक्र के नाम से भी जाना जाता है, और यह तनाव आयाम और चक्रों की संख्या के बीच का संबंध है। यह सामग्री, ज्यामिति और भारण के तरीके पर निर्भर करता है। इसे एकसमान सामग्री के नमूने पर स्थिर आयाम भार के तहत भौतिक परीक्षण द्वारा प्राप्त किया जा सकता है। कम मिश्रधातु इस्पात के पुर्जों के लिए अनुमान कम मिश्रधातु इस्पात सामग्री का उपयोग करके लगाया जा सकता है।
स्प्लाइन शाफ्ट कम शोर, न्यूनतम घिसाव और थकान के कारण होने वाली विफलता को कम करते हैं। हालांकि, असेंबली और निर्माण प्रक्रियाओं के दौरान शाफ्ट से कुछ यांत्रिक संचरण तत्वों को हटाना आवश्यक होता है। कार्यात्मक उद्देश्यों के लिए शाफ्ट में सापेक्ष अक्षीय गति की क्षमता होनी चाहिए। इसलिए, उच्च गुणवत्ता वाले टॉर्क संचरण, न्यूनतम बैकलैश और कम शोर के लिए अच्छे स्प्लाइन जोड़ आवश्यक हैं। स्प्लाइन शाफ्ट की प्रमुख विफलताओं में फ्रेटिंग जंग, दांतों का टूटना और थकान के कारण होने वाली विफलता शामिल हैं।
बाहरी डिस्क कैरियर स्प्लाइन तनाव और थकान के कारण टूटने के प्रति संवेदनशील होती है। कम शोर, कम घिसाव और थकान के कारण टूटने की उच्च ग्राहक मांग स्प्लाइन शाफ्ट को एक उत्कृष्ट विकल्प बनाती है। विश्लेषण के लिए एक टूटा हुआ स्प्लाइन गियर कपलिंग प्राप्त हुआ। इसे एक फिल्टर शाफ्ट के ऊपरी सिरे के पास स्थापित किया गया था और गियरबॉक्स मोटर में डाला गया था। इसका सेवा इतिहास अज्ञात था। टूटे हुए स्प्लाइन गियर कपलिंग में अनुदैर्ध्य दरार थी और स्प्लाइन गियर के दांतों के अंत में रुक गई थी। स्प्लाइन गियर के दांतों में घिसाव और विकृति भी देखी गई।
एक नई स्प्लाइन कपलिंग विधि खोखले बेलनाकार स्प्लाइन शाफ्ट में दोष प्रसार का पता लगाती है। स्प्लाइन कपलिंग का निर्माण एई विधि का उपयोग करके किया जाता है, जिसमें स्प्लाइन सेक्शन को सिलेंडर की दीवार के समान मोटाई वाली धातु की प्लेट में रोल किया जाता है। इसके अतिरिक्त, स्प्लाइन कपलिंग को गलत तरीके से संरेखित किया जाता है, जिससे स्प्लाइन के दांतों पर काफी दबाव पड़ता है। इससे घर्षण थकान और घिसाव की दर और भी बढ़ जाती है।
स्प्लाइन जॉइंट को 25 घंटे के संचालन के बाद लुब्रिकेट किया जाना चाहिए। बार-बार लुब्रिकेशन करने से रखरखाव लागत बढ़ सकती है और काम में रुकावट आ सकती है। इसके अलावा, लुब्रिकेंट जोड़ों पर घर्षणकारी कणों को रोक सकता है। कुछ मामलों में, लुब्रिकेंट मिसअलाइनमेंट का कारण भी बन सकता है, जिससे समय से पहले खराबी आ सकती है। इसलिए, शाफ्ट के सही ढंग से काम करने के लिए स्प्लाइन कपलिंग का लुब्रिकेशन अत्यंत महत्वपूर्ण है।
स्प्लाइन कपलिंग के डिज़ाइन को अनुकूलित करके इसकी घिसाव प्रतिरोध क्षमता और विश्वसनीयता को बढ़ाया जा सकता है। सतह उपचार, भार और घूर्णन स्प्लाइन कपलिंग के घर्षण गुणों को प्रभावित करते हैं। इसके अतिरिक्त, फ्लोटिंग स्प्लाइन कपलिंग के घिसाव का पूर्वानुमान लगाने के लिए एक परिमित तत्व विधि विकसित की गई है। यह विधि व्यावहारिक है और स्प्लाइन कपलिंग के घिसाव और थकान जीवन का पूर्वानुमान लगाने के लिए एक विश्वसनीय आधार प्रदान करती है।
इन्हें स्लॉटिंग या शेपिंग मशीन का उपयोग करके मशीनिंग किया जा सकता है।
विभिन्न उद्योगों में स्प्लाइन शाफ्ट को आकार देने के लिए मशीनों का उपयोग किया जा सकता है। ये गियरबॉक्स, ब्रेकिंग सिस्टम और एक्सल सहित कई अनुप्रयोगों में उपयोगी हैं। स्लॉटेड शाफ्ट को कई तरीकों से आकार दिया जा सकता है, जिनमें हॉबलिंग, ब्रोचिंग और स्लॉटिंग शामिल हैं। आकार देने के अलावा, स्प्लाइन बार के व्यास को कम करने में भी उपयोगी होते हैं।
स्लॉटिंग या शेपिंग मशीन का उपयोग करते समय, वर्कपीस को एक समान मोटाई वाले पेडस्टल पर टिकाया जाता है। मशीन में एक स्टैंड कॉलम और एक लिमिटिंग कॉलम (चित्र 1) लगे होते हैं, जो पेडस्टल की ऊपरी सतह के लंबवत स्थित होते हैं। लिमिटिंग कॉलम का अक्ष स्टैंड कॉलम के अक्ष के साथ एक ही रेखा में होता है। स्लॉटिंग या शेपिंग प्रक्रिया के दौरान, वांछित स्थान प्राप्त होने तक टूल को अंदर और बाहर किया जाता है।
One process involves cutting splines into a shaft. Straddle milling, spline shaping, and spline cutting are two common processes used to create splined shafts. Straddle milling involves a fixed indexing fixture that holds the shaft steady, while rotating milling cutters cut the groove in the length of the shaft. Several passes are required to ensure uniformity throughout the spline.
स्प्लाइन एक प्रकार का गियर है। ड्राइव शाफ्ट पर बनी धारियाँ या दाँत, दूसरे शाफ्ट के खाँचों के साथ अच्छी तरह से जुड़ जाते हैं। स्प्लाइन शाफ्ट से टॉर्क दूसरे शाफ्ट तक आसानी से पहुँचता है और साथ ही पावर ट्रांसफर भी अधिकतम हो जाता है। स्प्लाइन का उपयोग भारी वाहनों, निर्माण, कृषि और बड़े अर्थमूविंग मशीनों में किया जाता है। स्प्लाइन लगभग हर प्रकार की घूर्णी गति में उपयोग होते हैं, एक्सल से लेकर ट्रांसमिशन सिस्टम तक। ये बेहतर थकान प्रतिरोध और विश्वसनीयता भी प्रदान करते हैं।
स्लॉटिंग या शेपिंग मशीनों का उपयोग स्प्लाइन शाफ्ट को आकार देने के लिए भी किया जा सकता है। स्लॉटिंग मशीनों का उपयोग अक्सर स्प्लाइन शाफ्ट बनाने के लिए किया जाता है, क्योंकि इन मशीनों से इन्हें बनाना आसान होता है। स्लॉटिंग या शेपिंग मशीन का उपयोग करने से अलग-अलग आकार के स्प्लाइन शाफ्ट बन सकते हैं। यह सुनिश्चित करने के लिए कि आपके पुर्जे उच्चतम मानकों के अनुसार निर्मित हों, स्प्लाइन मानकों के एक सेट का पालन करना महत्वपूर्ण है।
A milling machine is another option for producing splined shafts. A spline shaft can be set up between two centers in an indexing fixture. Two side milling cutters are mounted on an arbor and a spacer and shims are inserted between them. The arbor and cutters are then mounted to a milling machine spindle. To make sure the cutters center themselves over the splined shaft, an adjustment must be made to the spindle of the machine.
आंतरिक और बाह्य स्प्लाइन के लिए मशीनिंग प्रक्रिया बहुत अलग होती है। बाह्य स्प्लाइन को ब्रोचिंग, शेपिंग, मिलिंग या हॉबिंग द्वारा बनाया जा सकता है, जबकि आंतरिक स्प्लाइन को नहीं। ये मशीनें कठोर मिश्र धातु का उपयोग करती हैं, लेकिन आंतरिक स्प्लाइन के लिए उतनी उपयुक्त नहीं होतीं। इन कार्यों के लिए स्लॉटिंग तंत्र वाली मशीन आवश्यक है।
editor by CX 2023-11-21