Deskripsi Produk
We manufacture screw and kneading segments for co-rotating twin screw extruders ranging from 15.6 mm to 450 mm and over. Our manufacturing specializes in segmented screws for twin screw extruders and is optimized for flexible order handling.
Co-rotating twin screw elements for
-APV -KOBE -OMC
-Buhler -KraussMaffei -Theysohn
-Buss -Berstorff- -Toshiba
-Clextral -Labtech -USEON
-Lantai – others
-JSW -Leistritz
-Keya -Maris
Types of the Screw Segments
* Convey Screw Segment
* Mixing Screw Segment
* Kneading Block & Disk
* Transition Screw Element
* Deep groove transfer element
* Screw element for side feeder
* 1-flighted,2-flighted,3-flighted screw elements
We offer a broader choice of materials:
For wear application:
* Tool Steel : W6Mo5Cr4V2;
* PM-HIP material : SAM10,SAM26,SAM39,CPM10V,CPM9V
For corrision application:
* Nitrided Steel: 38CrMoAI;
* PM-HIP material : SAM26,SAM39,CPM10V,CPM9V
For wear and corrision application:
* PM-HIP material:SAM26,SAM39,CPM10V,CPM9V
Other materials:
Stainless Steel: 316L,C276 etc.
By working closely with customers in choosing optional materials,we can minimize wear and tear and associated costs.
About our Company
Joiner Machinery Co.,Ltd has several years experience in the manufacture and supply of new and refurbished wear parts for all major makes of twin-screw extruders and the Industries involved in plastics industry, chemical industry, powder coating, food food industry, wood plastic etc..
Through close working relationships with our customers we have been able to fulfill their requirements. Flexibility enables us to design and manufacture standard and bespoke components for unique applications.
Through our highly trained and experienced staff we are able to offer technical support and advice.
Our strengths are based on many years experience supplying the following:
* Competitive costs per unit of production
* Fast turn round for collection and delivery on refurbished parts
* Parts available from stock for a wide range of extruder makes
* Comprehensive inspection procedure on all parts prior to dispatch
* A time proven quality service
* Latest manufacturing techniques and metallurgy, ensuring consistent and reliable performance of parts
* Customized solutions to meet specific needs.
FRQ
1. Q: Are you a factory or trading company?
—-A: A factory
2. Q: Where is your factory located? How can I visit there?
—–A: Our factory is located in HangZhou, ZheJiang Province, China,
1) You can fly to HangZhou Airport directly. We will pick you up when you arrive in the airport;
All our clients, from domestic or abroad, are warmly welcome to visit us!
3.Q: What makes you different with others?
—-A: 1) Our Excellent Service
For a quick, no hassle quote just send email to us
We promise to reply with a price within 24 hours – sometimes even within the hour.
2) Our quick manufacturing time
For Normal orders, we will promise to produce within 30 working days.
As a manufacturer, we can ensure the delivery time according to the formal contract.
4.Q: How about the delivery time?
—-A: This depends on the product. Typically standard products are delivered within 30 days.
- Q: What is the term of payment?
—-A: 1) T/T payment; 2) LC;
6.Q: May I know the status of my order?
—-A: Yes .We will send you information and photos at different production stage of your order. You will get the latest information in time.
| Bahan: | Hip Material |
|---|---|
| Transport Package: | Wood Packaging |
| Trademark: | Joiner |
| Origin: | China |
| Kustomisasi: | Tersedia | Permintaan Khusus |
|---|
Poros Beralur Panjang Standar
Poros beralur standar terbuat dari baja lunak dan sangat cocok untuk sebagian besar pekerjaan perbaikan, pembuatan mesin khusus, dan banyak aplikasi lainnya. Semua poros beralur standar memiliki panjang 2-3/4 inci, dan alur penuh tersedia dalam panjang berapa pun, dengan material tambahan dan panjang kerja yang tersedia berdasarkan permintaan dan penawaran. CZPT Manufacturing Company bangga menawarkan poros dengan panjang standar ini.
Antarmuka pemasangan rem cakram yang bergerigi
There are two common disc brake mounting interfaces, splined and center lock. Disc brakes with splined interfaces are more common. They are usually easier to install. The center lock system requires a tool to remove the locking ring on the disc hub. Six-bolt rotors are easier to install and require only six bolts. The center lock system is commonly used with performance road bikes.
Rem cakram tipe post mount memerlukan adaptor post mount, sedangkan rem cakram tipe flat mount tidak. Adaptor post mount lebih umum dan digunakan untuk sepeda gunung karbon, sementara antarmuka flat mount menjadi standar pada sepeda jalan raya dan sepeda gravel. Namun, semua adaptor rem cakram dapat disesuaikan untuk ukuran rotor. Sepeda jalan raya biasanya menggunakan rotor 160mm sedangkan sepeda gunung menggunakan rotor 180mm atau 200mm.
Antarmuka pemasangan rem cakram yang memiliki alur heliks.
Antarmuka pemasangan rem cakram beralur heliks dirancang dengan sambungan beralur antara hub dan cakram rem. Sambungan beralur ini memungkinkan perpindahan radial dan rotasional yang relatif besar antara cakram dan hub. Antarmuka beralur yang longgar dapat menyebabkan suara berderak karena pergerakan cakram relatif terhadap hub.
The splines on the brake disc and hub are connected via an air gap. The air gap helps reduce heat conduction from the brake disc to the hub. The present invention addresses problems of noise, heat, and retraction of brake discs at the release of the brake. It also addresses issues with skewing and dragging. If you’re unsure whether this type of mounting interface is right for you, consult your mechanic.
Disc brake mounting interfaces that are helix-splined may be used in conjunction with other components of a wheel. They are particularly useful in disc brake mounting interfaces for hub-to-hub assemblies. The spacer elements, which are preferably located circumferentially, provide substantially the same function no matter how the brake disc rotates. Preferably, three spacer elements are located around the brake disc. Each of these spacer elements has equal clearance between the splines of the brake disc and the hub.
Elemen pengatur jarak 6 mencakup bagian pegas heliks 6.1 dan perpanjangan ke arah tangensial yang berakhir pada kait 6.4. Kait-kait ini menempel pada cakram rem 1 di kedua arah. Bagian pegas heliks 5.1 dan 6.1 memiliki kekakuan yang cukup untuk menyerap benturan radial. Elemen pengatur jarak disusun di sekeliling lingkar zona saling terkait.
A helical splined disc mount includes a stabilizing element formed as a helical spring. The helical spring extends to the disc’s splines and teeth. The ends of the extension extend in opposite directions, while brackets at each end engage with the disc’s splines and teeth. This stabilizing element is positioned axially over the disc’s width.
Helical splined disc brake mounting interfaces are popular in bicycles and road bicycles. They’re a reliable, durable way to mount your brakes. Splines are widely used in aerospace, and have a higher fatigue life and reliability. The interfaces between the splined disc brake and BB spindle are made from aluminum and acetate.
Karena hub beralur memasang cakram secara heliks, kawat pegas dan cakram 2 akan berada dalam kontak yang sangat dekat. Saat kawat pegas bersentuhan dengan cakram, ia menciptakan gaya gesekan yang terdistribusi secara merata di seluruh cakram. Hal ini memungkinkan rentang gerakan aksial yang luas. Antarmuka pemasangan rem cakram yang beralur heliks memiliki kekuatan dan kekakuan yang lebih tinggi daripada jenis lainnya.
Antarmuka pemasangan rem cakram yang memiliki alur heliks dapat memiliki berbagai macam permukaan beralur. Permukaan beralur adalah jenis antarmuka pemasangan rem cakram yang paling umum. Biasanya terbuat dari baja tahan karat atau aluminium dan dapat digunakan untuk berbagai aplikasi. Namun, dudukan cakram beralur tidak akan mampu menopang cakram dengan kaliper rem berukuran besar.
editor by CX 2023-11-23