China wholesaler CZPT F Series Parallel Shaft Helical Gearbox Gearmotor with Free Design Custom

Deskripsi Produk

Aokman F Series Parallel Shaft Helical Gearbox GearMotor

Komponen:
1. Casing: Besi Cor
2. Roda Gigi: Roda Gigi Heliks yang Dikeraskan
3. Konfigurasi Input:
Dilengkapi dengan Motor Listrik
Input Poros Padat
Flensa Motor Standar IEC
4. Motor yang Berlaku:
Motor AC Satu Fasa, Motor AC Tiga Fasa
Motor Rem
Motor Inverter
Motor Multi-kecepatan
Motor tahan ledakan
Motor Rol
5. Konfigurasi Output:
Output Poros Padat
Keluaran Poros Berongga

Model:
F Series – Foot-mounted, solid shaft output
FAB Series – Foot-mounted, hollow shaft output
FA Series – Keyed hollow shaft output
FF Series – B5 Flange-mounted, solid shaft output
FAF Series – B5 Flange-mounted, hollow shaft output
FAZ Series – B14 Flange-mounted, hollow shaft output
FAT Series – Hollow shaft output, torque arm
FH, FHB, FHF, FHZ Series – Hollow shaft output, shrink disk
FV, FVB, FVF, FVZ Series – Hollow shaft output, splined hollow shaft
F(FA, FF, FAF, FAB, FAZ)S Series – Solid shaft input

Fitur:
1. Desain modular, struktur kompak. Motor gir heliks poros paralel ekstra ramping adalah solusi sempurna ketika ruang terbatas.
2. Motor gir heliks poros paralel seri F biasanya digunakan pada aplikasi konveyor dan pemrosesan material.
3. Unit roda gigi multi-tahap (2 atau 3 tahap) untuk kecepatan keluaran rendah
4. Poros keluaran berongga dengan sambungan berpasak, cakram penyusut, poros berongga beralur, atau lengan torsi
5. Dapat dikombinasikan dengan jenis gearbox lain (Seperti Seri R, Seri UDL)
6. Opsi pemasangan opsional (dipasang di kaki, dipasang pada flensa, dipasang pada poros)

Parameter:

Model	Diameter Poros Keluaran		Diameter Poros Masukan	Daya (kW)	Perbandingan	Torsi Maksimum (Nm)
	Poros Padat	Poros Berongga
F38	25 mm	30 mm	16 mm	0.18~3.0	3.81~128.51	200
F48	30 mm	35 mm	16 mm	0.18~3.0	5.06~189.39	400
F58	35 mm	40 mm	19 mm	0.18~5.5	5.18~199.70	600
F68	40 mm	40 mm	19 mm	0.18~5.5	4.21~228.99	820
F78	50 mm	50 mm	24 mm	0.37~11	4.30~281.71	1500
F88	60 mm	60 mm	28 mm	0.75~22	4.20~271.92	3000
F98	70 mm	70 mm	38 mm	1.1~30	4.68~276.64	4300
F108	90 mm	90 mm	42 mm	2.2~45	6.20~255.25	7840
F128	110 mm	100 mm	55 mm	7.5~90	4.63~172.33	12000
F158	120 mm	120 mm	70 mm	11~200	12.07~270.18	18000

Instalasi:
Dipasang di kaki
B5 Terpasang pada flensa
B14 Terpasang pada flensa
Dipasang pada poros
Pelumasan:
Pelumasan Rendaman Minyak dan Percikan
Pendinginan:
Pendinginan Alami

Pengemasan & Pengiriman:

Perusahaan kami:
AOKMAN was founded in 1982, which has more than 36 years in R & D and manufacturing of gearboxes, gears, shaft, motor and spare parts.
Kami dapat menawarkan solusi yang tepat untuk berbagai aplikasi yang tak terhitung jumlahnya. Produk kami banyak digunakan di berbagai sektor seperti metalurgi, baja, pertambangan, pulp dan kertas, pasar gula dan alkohol, serta berbagai jenis mesin lainnya dengan kehadiran yang kuat di pasar internasional.
AOKMAN has become a reliable supplier, CZPT to supply high quality gearboxes.With 36 years experience, we assure you the utmost reliability and security for both product and services.

Pelanggan yang berkunjung:

Layanan Kami:

Layanan pra-penjualan	1. Pilih model peralatan.
	2.Design and manufacture products according to clients’ special requirement.
	3. Melatih personel teknis untuk klien
Layanan selama penjualan	1. Periksa dan terima produk sebelum pengiriman.
	2. Membantu klien menyusun rencana penyelesaian masalah.
Layanan purna jual	1. Membantu klien mempersiapkan proyek konstruksi pertama.
	2. Melatih operator lini pertama.
	3. Ambil inisiatif untuk mengatasi masalah dengan cepat.
	4. Menyediakan pertukaran teknis.

Pertanyaan yang Sering Diajukan (FAQ):

Jika Anda memiliki parameter dan persyaratan khusus untuk gearbox kami, kustomisasi tersedia.

Types of Splines

There are 4 types of splines: Involute, Parallel key, helical, and ball. Learn about their characteristics. And, if you’re not sure what they are, you can always request a quotation. These splines are commonly used for building special machinery, repair jobs, and other applications. The CZPT Manufacturing Company manufactures these shafts. It is a specialty manufacturer and we welcome your business.

Spline involut

The involute spline provides a more rigid and durable structure, and is available in a variety of diameters and spline counts. Generally, steel, carbon steel, or titanium are used as raw materials. Other materials, such as carbon fiber, may be suitable. However, titanium can be difficult to produce, so some manufacturers make splines using other constituents.
When splines are used in shafts, they prevent parts from separating during operation. These features make them an ideal choice for securing mechanical assemblies. Splines with inward-curving grooves do not have sharp corners and are therefore less likely to break or separate while they are in operation. These properties help them to withstand high-speed operations, such as braking, accelerating, and reversing.
A male spline is fitted with an externally-oriented face, and a female spline is inserted through the center. The teeth of the male spline typically have chamfered tips to provide clearance with the transition area. The radii and width of the teeth of a male spline are typically larger than those of a female spline. These specifications are specified in ANSI or DIN design manuals.
The effective tooth thickness of a spline depends on the involute profile error and the lead error. Also, the spacing of the spline teeth and keyways can affect the effective tooth thickness. Involute splines in a splined shaft are designed so that at least 25 percent of the spline teeth engage during coupling, which results in a uniform distribution of load and wear on the spline.

Parallel key splines

A parallel splined shaft has a helix of equal-sized grooves around its circumference. These grooves are generally parallel or involute. Splines minimize stress concentrations in stationary joints and allow linear and rotary motion. Splines may be cut or cold-rolled. Cold-rolled splines have more strength than cut spines and are often used in applications that require high strength, accuracy, and a smooth surface.
A parallel key splined shaft features grooves and keys that are parallel to the axis of the shaft. This design is best suited for applications where load bearing is a primary concern and a smooth motion is needed. A parallel key splined shaft can be made from alloy steels, which are iron-based alloys that may also contain chromium, nickel, molybdenum, copper, or other alloying materials.
A splined shaft can be used to transmit torque and provide anti-rotation when operating as a linear guide. These shafts have square profiles that match up with grooves in a mating piece and transmit torque and rotation. They can also be easily changed in length, and are commonly used in aerospace. Its reliability and fatigue life make it an excellent choice for many applications.
The main difference between a parallel key splined shaft and a keyed shaft is that the former offers more flexibility. They lack slots, which reduce torque-transmitting capacity. Splines offer equal load distribution along the gear teeth, which translates into a longer fatigue life for the shaft. In agricultural applications, shaft life is essential. Agricultural equipment, for example, requires the ability to function at high speeds for extended periods of time.

Involute helical splines

Involute splines are a common design for splined shafts. They are the most commonly used type of splined shaft and feature equal spacing among their teeth. The teeth of this design are also shorter than those of the parallel spline shaft, reducing stress concentration. These splines can be used to transmit power to floating or permanently fixed gears, and reduce stress concentrations in the stationary joint. Involute splines are the most common type of splined shaft, and are widely used for a variety of applications in automotive, machine tools, and more.
Involute helical spline shafts are ideal for applications involving axial motion and rotation. They allow for face coupling engagement and disengagement. This design also allows for a larger diameter than a parallel spline shaft. The result is a highly efficient gearbox. Besides being durable, splines can also be used for other applications involving torque and energy transfer.
A new statistical model can be used to determine the number of teeth that engage for a given load. These splines are characterized by a tight fit at the major diameters, thereby transferring concentricity from the shaft to the female spline. A male spline has chamfered tips for clearance with the transition area. ANSI and DIN design manuals specify the different classes of fit.
The design of involute helical splines is similar to that of gears, and their ridges or teeth are matched with the corresponding grooves in a mating piece. It enables torque and rotation to be transferred to a mate piece while maintaining alignment of the 2 components. Different types of splines are used in different applications. Different splines can have different levels of tooth height.

Involute ball splines

When splines are used, they allow the shaft and hub to engage evenly over the shaft’s entire circumference. Because the teeth are evenly spaced, the load that they can transfer is uniform and their position is always the same regardless of shaft length. Whether the shaft is used to transmit torque or to transmit power, splines are a great choice. They provide maximum strength and allow for linear or rotary motion.
There are 3 basic types of splines: helical, crown, and ball. Crown splines feature equally spaced grooves. Crown splines feature involute sides and parallel sides. Helical splines use involute teeth and are often used in small diameter shafts. Ball splines contain a ball bearing inside the splined shaft to facilitate rotary motion and minimize stress concentration in stationary joints.
The 2 types of splines are classified under the ANSI classes of fit. Fillet root splines have teeth that mesh along the longitudinal axis of rotation. Flat root splines have similar teeth, but are intended to optimize strength for short-term use. Both types of splines are important for ensuring the shaft aligns properly and is not misaligned.
The friction coefficient of the hub is a complex process. When the hub is off-center, the center moves in predictable but irregular motion. Moreover, when the shaft is centered, the center may oscillate between being centered and being off-center. To compensate for this, the torque must be adequate to keep the shaft in its axis during all rotation angles. While straight-sided splines provide similar centering, they have lower misalignment load factors.

Keyed shafts

Essentially, splined shafts have teeth or ridges that fit together to transfer torque. Because splines are not as tall as involute gears, they offer uniform torque transfer. Additionally, they provide the opportunity for torque and rotational changes and improve wear resistance. In addition to their durability, splined shafts are popular in the aerospace industry and provide increased reliability and fatigue life.
Keyed shafts are available in different materials, lengths, and diameters. When used in high-power drive applications, they offer higher torque and rotational speeds. The higher torque they produce helps them deliver power to the gearbox. However, they are not as durable as splined shafts, which is why the latter is usually preferred in these applications. And while they’re more expensive, they’re equally effective when it comes to torque delivery.
Parallel keyed shafts have separate profiles and ridges and are used in applications requiring accuracy and precision. Keyed shafts with rolled splines are 35% stronger than cut splines and are used where precision is essential. These splines also have a smooth finish, which can make them a good choice for precision applications. They also work well with gears and other mechanical systems that require accurate torque transfer.
Carbon steel is another material used for splined shafts. Carbon steel is known for its malleability, and its shallow carbon content helps create reliable motion. However, if you’re looking for something more durable, consider ferrous steel. This type contains metals such as nickel, chromium, and molybdenum. And it’s important to remember that carbon steel is not the only material to consider.