제품 설명
제품 설명
- Design adjust-ability (cut-to-length) capabilities.
- Interchangeability to fit with most competitor models.
- Tri-lobe, lemon, and star shaft profiles available.
- Easy lock guard construction allows quick and easy assembly or removal with a simple tool such as a key, coin or screwdriver.
- Available extended lubrication E-kits reduce downtime with lubrication intervals of 50-250
hours and the high temperature triple lip seal retains grease better. - Customer dedicated engineering and sales support.
제품 매개변수
Drivelines are furnished without Cross & Bearing Kit and Outboard Yokes. Select kit and outboard yokes as required. When cross & bearing kit and outboard yokes are assembled, the overall compressed length of the driveline will be 39″, 48″ or 60″.
| Tractor Yoke | Overall Compressed Length Dim. “A” | Max Running Length | Implement Yoke | Application | |
| 1405711 | 1 3/8″ × 6 Spl. Q.D. | 31″ | 40″ | ||
| 1405715 | 1 3/8″ × 6 Spl. Q.D. | 35″ | 47″ | ||
| 140 0571 8 | 1 3/8″ × 6 Spl. Q.D. | 48″ | 72″ | ||
| 140 0571 0 | 1 3/8″ × 6 Spl. Q.D. | 60″ | 96″ | ||
| 14013548 | 48″ | 72″ | |||
| 14013560 | 60″ | 96″ | |||
| 14571539 (with crosses installed) | 39″ | 51″ | |||
| 14571548 (with crosses installed) | 48″ | 72″ | |||
| 140 0571 7 | 1 3/8″ × 6 Spl. Q.D. | 64 7/8″ | 88 7/8″ | 1 3/8″ Round 1/2″ Shear Pin Hole | 7 ft. Pull Type Rotary Cutter |
| 145714 | 1 3/8″ × 6 Spl. Q.D. | 48″ | 71 3/4″ | 1 1/2″ Round 3/8″ Keyway | Pumps |
| 1405716 | 1 3/8″ × 6 Spl. Safety Slide Lock | 36″ | 47 3/4″ | 1 3/8″ × 6 Spl. Safety Slide Lock | All Purpose |
| 14013531 | 1 3/8″ × 21 Spl. Safety Slide Lock | 31″ | 44″ | 1 1/8″ Hex Clamp | Combine Header |
Certifications
Related products
| Cross Kit/ Universal Joint
| Tube
| Shaft Shield Guard
| Yoke
|
| Torque Limiter
| PTO Spline & Adaptor & Hub | Universal Coupling
| Wide Angle Joint
|
회사 소개
As a China PTO shaft manufacturer, we have the following advantages:
- High quality products: We use the most advanced technology and materials to ensure that the PTO shafts we produce have excellent quality and durability.
- Comprehensive product line: Our PTO shafts cover a variety of types and sizes to meet the needs of different customers.
- Customized service: We can produce customized PTO shaft products according to the specific needs of customers, thereby ensuring that customer requirements are met.
- Fast delivery time: Our production line operates efficiently and can quickly respond to customer needs, ensuring rapid delivery of PTO shaft products.
- Professional technical support: We have a professional technical team that can provide customers with various technical support and consulting services to ensure that customers receive the best solution.
We welcome you to our PTO shaft production factory in China. We are 1 of the largest China PTO shaft manufacturers , focusing on providing customers with high-quality and high-performance PTO shaft. We are an experienced manufacturer dedicated to producing high-quality PTO shafts to help customers successfully complete their various projects.
We are committed to using the most advanced technology and equipment to ensure that the PTO shafts we produce have excellent quality and reliability, to ensure that customers receive the best performance and service life. Our team is composed of experienced professionals who can tailor the PTO shaft to the customer’s needs to best meet their specific requirements.
In addition, our factory has a strict quality management system to ensure that each PTO shaft meets industry standards and passes all necessary quality tests. We have first-class after-sales service and will make every effort to ensure customer satisfaction.
We look CZPT to working with you and manufacturing high-quality PTO shafts for you to help your project achieve greater success. If you have any questions about our factory, please feel free to contact us.
| Material: | Carbon Steel |
|---|---|
| Load: | Drive Shaft |
| Stiffness & Flexibility: | Flexible Shaft |
| Journal Diameter Dimensional Accuracy: | IT6-IT9 |
| Axis Shape: | Straight Shaft |
| Shaft Shape: | Real Axis |
| Samples: | US$ 9999/Piece 1 Piece(Min.Order) | |
|---|
디스크 브레이크 장착 인터페이스에 스플라인 커플링을 사용하는 이점
Spline couplings are commonly used for securing disc brake mounting interfaces. Spline couplings are often used in high-performance vehicles, aeronautics, and many other applications. However, the mechanical benefits of splines are not immediately obvious. Listed below are the benefits of spline couplings. We’ll discuss what these advantages mean for you. Read on to discover how these couplings work.
디스크 브레이크 장착 인터페이스는 스플라인 방식입니다.
There are two common disc brake mounting interfaces – splined and six-bolt. Splined rotors fit on splined hubs; six-bolt rotors will need an adapter to fit on six-bolt hubs. The six-bolt method is easier to maintain and may be preferred by many cyclists. If you’re thinking of installing a disc brake system, it is important to know how to choose the right splined and center lock interfaces.
항공우주 응용 분야
항공기 스플라인 커플링에 사용되는 스플라인은 매우 복잡합니다. 기존 연구에서는 스플라인 설계에 대해 다루었지만, 스플라인 커플링의 정렬 불량 문제를 다룬 연구는 드뭅니다. 그럼에도 불구하고, 본 연구에서 얻은 정확한 결과는 상용화되지 않은 전용 시뮬레이션 도구를 사용하여 얻은 것입니다. 하지만 이러한 도구들은 본 연구의 접근 방식에 유용한 참고 자료를 제공할 수 있습니다. 설계자들이 접촉 압력 피크를 평가하는 데 사용할 수 있는 간단한 도구가 있다면 유용할 것입니다. 본 연구의 분석적 접근 방식은 이러한 문제에 대한 해답을 제시합니다.
항공우주 분야에 사용되는 스플라인 커플링의 설계는 무게를 최소화하고 고장 메커니즘을 방지하기 위해 정확해야 합니다. 무게 감소 외에도 프레팅 피로를 최소화하는 것이 중요합니다. 스플라인 커플링 톱니에 작용하는 압력 분포는 프레팅 피로를 결정하는 중요한 요소입니다. 따라서 본 연구에서는 해석적 및 실험적 방법을 이용하여 스플라인 커플링의 축 방향 접촉 압력 분포를 분석합니다.
스플라인 커플링의 톱니는 결합 방식에 따라 분류될 수 있습니다. 본 연구에서는 피치 직경에 작용하는 스플라인 커플링 톱니의 접촉력 분포를 조사합니다. 유한 요소법(FEM) 모델을 사용하여 공칭 오프셋 및 평행 오프셋 오정렬에 대한 수치 결과를 도출했습니다. 축 방향 톱니 프로파일은 커플링 부품의 거동과 내마모성을 결정합니다. 각도 오정렬 또한 중요한 고려 사항이며, 이로 인해 오정렬이 발생합니다.
스플라인 커플링의 마모 손상을 평가하려면 부품에 가해지는 마찰 마모(프레팅)의 영향을 고려해야 합니다. 이 마모는 맞물리는 톱니 사이의 상대적인 움직임으로 인해 발생합니다. 이러한 마찰 마모는 진동, 주기적인 톱니 변형 또는 각도 불량으로 인해 발생할 수 있습니다. 이 분석 결과는 설계자가 스플라인 커플링 설계를 개선하고 성능을 향상시키는 데 도움이 될 수 있습니다.
내마모성 폴리머인 CZPT 폴리이미드는 고온 스플라인 커플링에 널리 사용되는 소재입니다. 이 소재는 마찰과 마모를 줄이고, 마찰이 적은 표면을 제공하며, 마모율이 낮습니다. 또한 금속 대 금속 스플라인 연결부에 비해 최대 50배 더 긴 수명을 제공합니다. 따라서 스플라인 커플링에 적합한 소재를 선택하는 것이 중요합니다.
고성능 차량
A spline coupler is a device used to connect splined shafts. A typical spline coupler resembles a short pipe with splines on either end. There are two basic types of spline coupling: single and dual spline. One type attaches to a drive shaft, while the other attaches to the gearbox. While spline couplings are typically used in racing, they’re also used for performance problems.
스플라인 커플링에서 가장 중요한 과제는 스플라인 조인트의 최적 치수를 결정하는 것입니다. 이는 부품 파손을 초래할 수 있는 조인트 정렬 불량을 시뮬레이션할 수 있는 상용 코드가 없기 때문에 어려운 문제입니다. 본 논문에서는 스플라인 연결부의 접촉 압력을 추정하는 해석적 접근 방식을 제시합니다. 결과는 수치적 접근 방식과 유사하지만, 커플링 작동을 정확하게 모델링하려면 특수 코드가 필요합니다. 이 연구는 여러 중요한 문제점을 부각하고 고성능 차량에 스플라인 커플링을 더욱 쉽게 적용할 수 있도록 하는 것을 목표로 합니다.
The stiffness of spline assemblies can be calculated using tooth-like structures. Such splines can be incorporated into the spline joint to produce global stiffness for torsional vibration analysis. Bearing reactions are calculated for a certain level of misalignment. This information can be used to design bearing dimensions and correct misalignment. There are three types of spline couplings.
주요 직경 맞춤 스플라인은 외경이 엄격하게 제어되어 제작됩니다. 이러한 정밀한 맞춤은 수컷 스플라인에서 암컷 스플라인으로 동심도를 전달합니다. 수컷 스플라인의 톱니는 일반적으로 모서리가 깎인 모따기 처리되어 있으며, 필렛 반경을 가진 여유 공간이 있습니다. 이러한 스플라인은 주로 빌릿 강철이나 알루미늄으로 제작됩니다. 이 재료들은 강도가 뛰어나고 단조 공정을 통해 균일한 결정 구조를 갖는 것으로 잘 알려져 있습니다. ANSI 및 DIN 설계 매뉴얼은 맞춤 등급을 정의합니다.
디스크 브레이크 장착 인터페이스
디스크 브레이크 장착 인터페이스용 스플라인 커플링은 허브와 브레이크 디스크를 연결하는 방식의 일종입니다. 이는 디스크에서 액슬 허브로의 열 전달을 줄여주는 내구성이 뛰어난 연결 메커니즘입니다. 또한, 이 장착 방식은 액슬 허브가 디스크와 직접 접촉하는 것을 방지합니다. 더불어, 차량의 가동 중지 시간과 휠 얼라인먼트 유지에 필요한 정비 횟수를 최소화하도록 설계되었습니다.
디스크 브레이크는 일반적으로 액슬 허브 스플라인과 상당한 금속 대 금속 접촉면을 가지고 있습니다. 디스크는 중간 삽입물을 통해 허브에 고정됩니다. 이러한 금속 대 금속 접촉은 브레이크 디스크에서 액슬 허브로 브레이크 열을 전달하는 데에도 도움이 됩니다. 디스크 브레이크 장착 인터페이스용 스플라인 커플링은 나사산이 있거나 없는 스플라인 형태의 장착 링으로 구성됩니다.
During drag brake experiments, perforated friction blocks filled with various additive materials are introduced. The materials included include Cu-based powder metallurgy material, a composite material, and a Mn-Cu damping alloy. The filling material affects the braking interface’s wear behavior and friction-induced vibration characteristics. Different filling materials produce different types of wear debris and have different wear evolutions. They also differ in their surface morphology.
Disc brake couplings are usually made of two different types. The plain and HD versions are interchangeable. The plain version is the simplest to install, while the HD version has multiple components. The two-piece couplings are often installed at the same time, but with different mounting interfaces. You should make sure to purchase the appropriate coupling for your vehicle. These interfaces are a vital component of your vehicle and must be installed correctly for proper operation.
디스크 브레이크는 디스크와 허브를 연결하는 부품을 사용하여 제동력을 집중시키고 림으로 전달합니다. 이러한 부품은 일반적으로 스테인리스강으로 제작되어 디스크 브레이크 장착 인터페이스의 제조 비용을 증가시킵니다. 하지만 디스크 브레이크는 높은 제동력을 견뎌야 하므로 재질에 부담을 줍니다. 또한, 중간 부품에 전달되는 과도한 열은 브레이크 시스템의 피로 수명과 장기적인 강도에 악영향을 미칠 수 있습니다.
editor by CX 2023-11-07