产品描述
Customized High Precision Spare Parts Auto/Truck/Drive/Gear/Spline/Propeller/Half/Sleeve/Machinery/Sliding/Transmission Axle Shaft 42CrMo 20CrMoTi
(1) Accessory products of the truck, the product quality is stable and reliable.
(2) Forged with 42CrMo material and heat treated and tempered for 32 degrees, so that the half shaft has stronger toughness and is not easy to break and bend.
(3) Processed in the machining center, ensure that the products have rigorous dimensional coordinates to ensure 100% qualified rate of products.
(4) Products are inspected 1 by 1 and delivered out of the warehouse, with unified laser identification to ensure product traceability.
(5) Various sizes of axle shafts can be customized to meet customer needs.
(6) The unified brand carton, inner bag and integral foam packaging, which is strong and beautiful.
Factory Show
More Products
| Truck Model | Sinotruk, Shacman, CHINAMFG Auman, CHINAMFG Xihu (West Lake) Dis., Xihu (West Lake) Dis.feng, Xihu (West Lake) Dis.feng Liuqi Balong, North BENZ( BEIBEN), C&C, JAC, etc. | |
| Product catalogue | Axle | Wheel Assembly |
| Differential Assembly | ||
| Main Reducer Assembly | ||
| Inner Ring Gear& Bracket | ||
| Basin Angle Gear/ Bevel Gear | ||
| Axle Shaft/ Half Shaft & Through Shaft | ||
| Axle Housing& Axle Assembly | ||
| Steering knuckle & Front Axle | ||
| Gear | ||
| Brake Drum& Wheel Hub | ||
| Flange | ||
| Bearing | ||
| Main Reducer Housing | ||
| Oil Seal Seat | ||
| Nut& Shim Series | ||
| Brake Backing Plate | ||
| Chassis Support Products | Leaf Spring Bracket | |
| Drop Arm Series | ||
| Bracket Series | ||
| Leaf Spring Shackle Series | ||
| Balanced Suspension Series | Balance Shaft Assembly | |
| Balance Shaft Housing | ||
| Axle Spring Seat | ||
| Thrust Rod | ||
| Balance Shaft Parts | ||
| Shock Absorber Series | Shock Absorber | |
| Shock Absorbing Airbag | ||
| Steering System | Power Steering Pump | |
| Power Steering Gear | ||
| Rubber Products | Oil Seal | |
| Rubber Support | ||
| Thrust Rod Rubber Core | ||
| Truck Belt | ||
| Engine support | ||
| Other | ||
| Clutch Series | Clutch Pressure Plate | |
| Clutch Disc | ||
| Flywheel Assembly | ||
| Flywheel Ring Gear | ||
| Adjusting Arm Series | ||
Function
Heavy trucks usually have double rear axles. If they are driven separately, they need to use 2 transmission shafts or add a transfer case at the output of the gearbox, which is heavy and cumbersome. Now a through shaft is designed in the middle axle to solve this problem. Only 1 transmission shaft is needed to drive 2 rear axles at the same time.
包装和运输
展览
常问问题
Q1. Are you a factory or trading company?
We are a factory integrating research, development, production and sales.
Q2. What are the advantages of your products?
We support product customization to meet customer needs for special products. We can strictly control the products from raw materials to production, processing, product quality inspection, delivery, packaging, etc., and provide customers with high-end products and the most advantageous prices.
Q3. How about products price?
We are a factory, all products are direct sale at factory price. For the same price, we will provide the best quality; for the same quality, we have the most advantageous price.
Q4. What is your terms of packing?
We have branded packaging and neutral packaging, and we can also do what you want with authorization. This is flexible.
Q5. How to guarantee your after-sales service?
Strict inspection during production, Strictly check the products before shipment to ensure our packaging in good condition. Track and receive feedback from customer regularly. Our products warranty is 365 days.
Each product provides quality assurance service. If there is a problem with the product within the warranty period, the customer can negotiate with us in detail about the related claims, and we will do our best to satisfy the customer.
Certifications
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| 材料： | 45#Steel, 42CrMo, 20crmoti |
|---|---|
| Load: | Drive Shaft |
| Journal Diameter Dimensional Accuracy: | High Precision |
| 示例： | US$ 29/Piece 1 件（最低订购量） | Order Sample |
|---|
| 定制化： | 可用的 | 定制请求 |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
| Shipping Cost: Estimated freight per unit. | about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
How do spline shafts contribute to efficient power transmission?
Spline shafts play a vital role in enabling efficient power transmission in various mechanical systems. Here’s a detailed explanation of how spline shafts contribute to efficient power transmission:
1. 扭矩传递：
Spline shafts are designed to transmit torque from one component to another. They provide a positive, non-slip connection that allows for efficient power transfer without slippage or loss of energy. The splines on the shaft engage with corresponding splines on the mating component, creating a strong mechanical connection for torque transmission.
2. 负荷分配：
Spline shafts distribute the applied load evenly across the engagement surfaces. The teeth or grooves on the shaft’s spline profile ensure that the load is shared across multiple contact points. This even load distribution helps prevent localized stress concentrations and reduces the risk of premature wear or failure. Efficient load distribution ensures that power is transmitted smoothly and reliably.
3. 错位补偿：
Spline shafts can accommodate a certain degree of misalignment between the mating components. The spline profile design allows for angular or parallel misalignment without compromising the power transmission capability. This misalignment compensation capability is crucial in maintaining efficient power transmission in situations where perfect alignment is challenging or subject to variations.
4. High Torque Capacity:
Spline shafts are designed to withstand high torque levels. The spline profile, engagement length, and material selection are optimized to handle the expected torque requirements. This high torque capacity ensures that the shaft can efficiently transmit power without experiencing excessive deflection or failure under normal operating conditions.
5. Torsional Stiffness:
Spline shafts exhibit high torsional stiffness, which means they resist twisting or torsional deflection when subjected to torque. The shaft’s design, including its diameter, spline profile, and material properties, contributes to its torsional stiffness. High torsional stiffness minimizes power loss due to deformation or flexing of the shaft, allowing for efficient power transmission.
6. Reliable Connection:
Spline shafts provide a reliable and repeatable connection between the driving and driven components. Once properly engaged, the spline shaft maintains its connection, ensuring consistent power transmission over time. This reliability is crucial in maintaining efficiency and preventing power loss or interruptions during operation.
7. Minimal Backlash:
Backlash refers to the slight rotational play or clearance between mating components. Spline shafts, when properly designed and manufactured, can minimize backlash in the power transmission system. Reduced backlash ensures smoother operation, improved accuracy, and efficiency by minimizing power losses associated with reversing or changing direction.
8. Compact Design:
Spline shafts offer a compact and space-efficient solution for power transmission. Their design allows for a relatively small footprint while providing robust torque transmission capabilities. The compact design is particularly advantageous in applications where space is limited, such as automotive drivetrains or compact machinery.
By incorporating spline shafts into mechanical systems, engineers can achieve efficient power transmission, ensuring that power is effectively transferred from the driving source to the driven components. The unique design features of spline shafts enable reliable torque transmission, even load distribution, misalignment compensation, high torque capacity, torsional stiffness, reliable connections, minimal backlash, and compactness.
花键轴能否用于汽车领域？如果可以，该如何使用？
Yes, spline shafts are extensively used in automotive applications due to their ability to transmit torque and provide reliable power transmission. Here’s how spline shafts are used in automotive applications:
花键轴在各种汽车系统和部件中发挥着至关重要的作用，包括：
- 传动系统：花键轴是车辆传动系统的重要组成部分。它们将发动机的扭矩传递到车轮，使车辆能够行驶。花键轴存在于变速器、差速器和驱动轴等部件中。在手动变速器中，花键轴连接变速器输入轴和离合器片，从而实现发动机动力的传递。在自动变速器中，花键轴用于液力变矩器和输出轴。
- Steering System: Spline shafts are employed in the steering system to transmit torque from the steering wheel to the steering rack or gearbox. They provide a direct connection between the driver’s input and the movement of the wheels, allowing for steering control.
- Power Take-Off (PTO) Systems: Some vehicles, particularly commercial trucks and agricultural machinery, utilize PTO systems. Spline shafts are used in PTOs to transfer power from the vehicle’s engine to auxiliary equipment, such as hydraulic pumps, generators, or agricultural implements.
- 分动箱：在四轮驱动（4WD）或全轮驱动（AWD）车辆中，分动箱用于将动力分配到前后车轴。分动箱内采用花键轴，在变速器和前后驱动轴之间传递扭矩。
- 传动轴：传动轴中包含花键轴，用于将扭矩从变速器或分动箱传递到后轮驱动车辆的后桥。它们能够适应悬架行程引起的变速器和后桥之间的相对运动。
在汽车应用中，花键轴的设计旨在承受高扭矩负载，提供精确的扭矩传递，并适应不对中和运行工况的变化。它们通常由高强度钢或合金材料制成，以确保其耐用性和耐磨性。适当的润滑对于最大限度地减少摩擦和确保平稳运行至关重要。
在汽车应用中使用花键轴可以实现高效的动力传输、精确的控制和可靠的性能，从而提高车辆的整体功能和驾驶性能。
花键轴与其他类型的轴有何不同？
A spline shaft differs from other types of shafts in several ways. Here’s a detailed explanation:
1.样条结构：
花键轴的表面加工有一系列凸脊或齿（花键）。这些花键与配合部件形成精确可控的界面，从而实现扭矩传递和相对运动。相比之下，其他类型的轴，例如普通轴或键槽轴，没有花键，而是依靠其他机制来传递扭矩。
2. 扭矩传递和相对运动：
与通过摩擦或机械连接传递扭矩的普通轴或键槽轴不同，花键轴既能传递扭矩，又能实现轴与配合部件之间的相对运动。轴上的花键与配合部件上的相应花键啮合，形成互锁结构，在传递旋转力的同时，还能适应轴向或径向位移。这一特性赋予了花键轴极高的灵活性，尤其适用于需要适应不对中或相对运动的应用场合。
3. 负荷分配：
One of the advantages of spline shafts is their ability to distribute loads over a larger surface area. The multiple contact points created by the splines help distribute the applied load evenly along the shaft’s length. This load distribution minimizes stress concentrations and reduces the risk of premature wear or failure. In contrast, other types of shafts may rely on a single keyway or frictional contact, which can result in higher stress concentrations and limited load distribution.
4. 设计灵活性：
Spline shafts offer greater design flexibility compared to other types of shafts. The number, size, and shape of the splines can be customized to meet specific design requirements. This allows for optimization of torque transmission, load-bearing capacity, and relative movement characteristics based on the application’s needs. Other types of shafts may have more standardized designs and limited customization options.
5. 应用多样性：
花键轴广泛应用于各种行业和应用中，尤其适用于扭矩传递、相对运动和载荷分配至关重要的场合。它们常用于变速箱、动力传输系统、转向机构和其他旋转系统。而其他类型的轴，例如普通轴或键槽轴，可能更适合扭矩传递较为简单、无需相对运动的应用。
6. 安装和维护：
与其他类型的轴相比，花键轴在安装过程中可能需要更精确的加工和对准。配合部件必须精确匹配，以确保正确的啮合和扭矩传递。此外，花键轴可能需要定期检查和维护，以确保花键的完整性和最佳性能。
总而言之，花键轴与其他类型的轴的区别在于其独特的花键结构、相对运动适应能力、载荷分布能力、设计灵活性、应用多样性以及特定的安装和维护要求。这些特性使得花键轴非常适合需要精确扭矩传递、灵活性和载荷分布的应用。
editor by CX 2024-04-12