Product Description

Wholesale Motorcycle Engine Parts Clutch Center Set SUZUKI110

“Motorcycle clutches have worked this way for a century, with variations.”

The spinning engine is turning the clutch outer drum and the 5 or more friction discs it drives. The inner clutch drum and the steel plates to which it is splined remain stationary because the act of putting the transmission into gear connects gearbox input and output shafts to each other. Because the bike is at rest, the rear wheel and everything connected to it-drive chain, plus both gearbox shafts-remain stationary.

To depart, you smoothly advance the throttle while with your left hand feeling for the “engagement point” -the lever position at which significant friction begins to occur between the friction discs (spinning with the engine and clutch outer drum) and the steel discs (splined to the clutch inner drum and connected to the stationary gearbox input shaft).
The spinning engine is turning the clutch outer drum and the 5 or more friction discs it drives. The inner clutch drum and the steel plates to which it is splined remain stationary because the act of putting the transmission into gear connects gearbox input and output shafts to each other. Because the bike is at rest, the rear wheel and everything connected to it-drive chain, plus both gearbox shafts-remain stationary.

Market Background:

The replacement and repair of motorcycle clutch need to dismantle the engine box, which is complex and time-consuming.The existing maintenance market often has the phenomenon that the unqualified clutch can not be used or the service time is very short, and it is not durable.It is time-consuming and laborious for repeated disassembly and repair, which seriously affects the user experience and the work efficiency of the repair technician.
In order to avoid this kind of phenomenon, our company launched “Yonghan” brand upscale products!The qualified rate of products will reach “100 percent”, and the normal service life of each product will be extended by 30%!
At the same time, the products have super high cost performance ratio, which makes users feel at ease and the repairmen feel comfortable.

Company Profile:

ZheJiang CZPT Machinery Processing Co., Ltd. was established in 2003 which is specialized in manufacturing motorcycle clutch assembly and spare parts with complete varieties and most reasonable price in China mainland.
Our company owns tens of equipment for processing and testing.The total area of workshop,warehouse and office building is about 10000 square meters.There are 200 staff in our company,including 20 professionals.The company’s main products are: GY6-50,GY6-90,GY6-125,C100,CY80,C90,C120,T100,T125,DK100A,DK100B,DX125,FY100,WIN100,YX100,DX110,DX125,982,983,GS125,CG125,CG150,CG200,CG250,CG260,CB125,CB150,CB200,CB250,CBF150,CBT125,CBT250,LF175,GF125,GN250,ATV250,ATV400,BAJAJ100,BAJAJ135,BANAJ180,TVSN35,TVSN45,YH162  for clutch assembly and parts. We have aboundant resources of motorcycle engine accessories and established a long-term cooperative relationship with famous domestic enterprises.
Our products have exported to Parkistan,Iran,Egypt,Turkey India,Burma,Malaysia,Korea,Indonesia, Vietnam,Laos,Cambodia,Thailand,The Philippines,The Dominican,Brazil,Xihu (West Lake) Dis.via etc., whitch covers  more than 20 countries including south-east Asia,Middle- East,South America and Africa.
With the company’s development and strength of production capacity, we heartily hope that we can have long relations of cooperation with the vast number of peers and customers.We could providing products with high quality and services for customers adhering to the realistic,innovative,beneficial,and CZPT faith.      

YH brand clutch advantage:

1.OEM service & competitive price

2.Reliable transfer torque

3.Steady force transmission

4.Long service life & wearable

5.On time delivery & better after-sales service

6.Positive customer feedback from oversea and domestic market

 Product Detail:
 

Product Name:	Wholesale Motorcycle Engine Parts Clutch Center Set SUZUKI110
Model No.:	QS110/SD110
Materials:	Aluminium
Adaptable vehicle:	SUZUKI
Distinguishing feature:	These products can stand wear and tear with long service life.
Main Market	Southeast Asia
Certificate	ISO9001:2015
Package:	Normal Export package, and if customer have special request on packing, we can do  accordingly
Delivery time:	5-7 days according to detailed order
Payment:	30% deposits, 70% balance before shipment

Other models available:
 

REGI0N	MODEL
Brazil	CB300	FAZER250/LANDER250	TITAN95/99/CG83 > TODAY/CBX200/TITAN2000	YBR125 ATE 2014 /XTZ125 ATE 2014
	YBR125/FACTOR 125	TITAN150 2004/BROS150>2006/FAN150/FAN125>2009	TITAN CRF230	TITAN 150 05>14/ FAN 150/FAN 125>09/
	CBX 250 TWISTER	CG 125/TITAN/FAN 83>08
Indonesia	GRAND	LAGENDA	KARISMA	REVO
	JUPZTER Z 18T	JUPZTER Z 24T	JUPZTER Z 20T	KAZE
	FORCE-1	JUPITER Z	SMASH	LC135 JUPITER MX
	SHOGUN	SHOGUN-I	KAZE	SPARK
	JUPZTER Z 21T	CRYPTON	JUPITER Z1 VEGA ZR
Malaysia	LC135	SRU115	SRL115 F1	SRL110
	LAGENDA	KARISMA	Y110/100	C70-8
	GN5
South America	CD100	CG125	CG125-5P	AX100
	CB125	AT110	BAJAJ135	TITAN /STORM /BROSS /XLR/BX150
	YBR125	SMASH	SMASH BIT	WAVE
	BM150	V80	YB100	CG125N/M
	BAJAJ100	TITAN 150	RX150	TITAN125
Africa	AX100	CG125N/M	CG125O/M	YB100
	CD110	CRYPTON	VEGAS	SPARK
	DX100
Thailand	WAVE110	WAVE125	Y100	DREAM C100N
	AX100	GN5	DREAM

Product Detail:

Strandard exporting carton box packing:

Step1: Use plastic bag packing

Step2: Put it into a small carton box,one pcs 1 box

Step3: Put the small box into big carton box,one box 16pcs

Step4: Put the big carton box on the tray

Step5: Move into the ware house,waiting for deviery

FAQ:

Q1: What is your terms of packing?
A1: Generally, We will load a package or Carton.

Q2: What is your terms of payment?
A2: FOB,CFR,CIF,EXW,FCA,LC.

Q3: How about your delivery time?
A3: It depends on what kind of logistics you choose and in which country you are. Generally,it will take 15days and 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q4: Can you produce according to the samples?
A4: You need to confirm with us what kind of accessories, we will decide whether it can be produce according to the accessories.

Q5: How do you make our business long-term and good relationship?
A5: 1. We keep good quality and competive price to ensure our customers benefit;

Factory Show:

 

The Different Types of Splines in a Splined Shaft

A splined shaft is a machine component with internal and external splines. The splines are formed in 4 different ways: Involute, Parallel, Serrated, and Ball. You can learn more about each type of spline in this article. When choosing a splined shaft, be sure to choose the right 1 for your application. Read on to learn about the different types of splines and how they affect the shaft’s performance.

Involute splines

Involute splines in a splined shaft are used to secure and extend mechanical assemblies. They are smooth, inwardly curving grooves that resist separation during operation. A shaft with involute splines is often longer than the shaft itself. This feature allows for more axial movement. This is beneficial for many applications, especially in a gearbox.
The involute spline is a shaped spline, similar to a parallel spline. It is angled and consists of teeth that create a spiral pattern that enables linear and rotatory motion. It is distinguished from other splines by the serrations on its flanks. It also has a flat top. It is a good option for couplers and other applications where angular movement is necessary.
Involute splines are also called involute teeth because of their shape. They are flat on the top and curved on the sides. These teeth can be either internal or external. As a result, involute splines provide greater surface contact, which helps reduce stress and fatigue. Regardless of the shape, involute splines are generally easy to machine and fit.
Involute splines are a type of splines that are used in splined shafts. These splines have different names, depending on their diameters. An example set of designations is for a 32-tooth male spline, a 2,500-tooth module, and a 30 degree pressure angle. An example of a female spline, a fillet root spline, is used to describe the diameter of the splined shaft.
The effective tooth thickness of splines is dependent on the number of keyways and the type of spline. Involute splines in splined shafts should be designed to engage 25 to 50 percent of the spline teeth during the coupling. Involute splines should be able to withstand the load without cracking.

Parallel splines

Parallel splines are formed on a splined shaft by putting 1 or more teeth into another. The male spline is positioned at the center of the female spline. The teeth of the male spline are also parallel to the shaft axis, but a common misalignment causes the splines to roll and tilt. This is common in many industrial applications, and there are a number of ways to improve the performance of splines.
Typically, parallel splines are used to reduce friction in a rotating part. The splines on a splined shaft are narrower on the end face than the interior, which makes them more prone to wear. This type of spline is used in a variety of industries, such as machinery, and it also allows for greater efficiency when transmitting torque.
Involute splines on a splined shaft are the most common. They have equally spaced teeth, and are therefore less likely to crack due to fatigue. They also tend to be easy to cut and fit. However, they are not the best type of spline. It is important to understand the difference between parallel and involute splines before deciding on which spline to use.
The difference between splined and involute splines is the size of the grooves. Involute splines are generally larger than parallel splines. These types of splines provide more torque to the gear teeth and reduce stress during operation. They are also more durable and have a longer life span. And because they are used on farm machinery, they are essential in this type of application.

Serrated splines

A Serrated Splined Shaft has several advantages. This type of shaft is highly adjustable. Its large number of teeth allows large torques, and its shorter tooth width allows for greater adjustment. These features make this type of shaft an ideal choice for applications where accuracy is critical. Listed below are some of the benefits of this type of shaft. These benefits are just a few of the advantages. Learn more about this type of shaft.
The process of hobbing is inexpensive and highly accurate. It is useful for external spline shafts, but is not suitable for internal splines. This type of process forms synchronized shapes on the shaft, reducing the manufacturing cycle and stabilizing the relative phase between spline and thread. It uses a grinding wheel to shape the shaft. CZPT Manufacturing has a large inventory of Serrated Splined Shafts.
The teeth of a Serrated Splined Shaft are designed to engage with the hub over the entire circumference of the shaft. The teeth of the shaft are spaced uniformly around the spline, creating a multiple-tooth point of contact over the entire length of the shaft. The results of these analyses are usually satisfactory. But there are some limitations. To begin with, the splines of the Serrated Splined Shaft should be chosen carefully. If the application requires large-scale analysis, it may be necessary to modify the design.
The splines of the Serrated Splined Shaft are also used for other purposes. They can be used to transmit torque to another device. They also act as an anti-rotational device and function as a linear guide. Both the design and the type of splines determine the function of the Splined Shaft. In the automobile industry, they are used in vehicles, aerospace, earth-moving machinery, and many other industries.

Ball splines

The invention relates to a ball-spinned shaft. The shaft comprises a plurality of balls that are arranged in a series and are operatively coupled to a load path section. The balls are capable of rolling endlessly along the path. This invention also relates to a ball bearing. Here, a ball bearing is 1 of the many types of gears. The following discussion describes the features of a ball bearing.
A ball-splined shaft assembly comprises a shaft with at least 1 ball-spline groove and a plurality of circumferential step grooves. The shaft is held in a first holding means that extends longitudinally and is rotatably held by a second holding means. Both the shaft and the first holding means are driven relative to 1 another by a first driving means. It is possible to manufacture a ball-splined shaft in a variety of ways.
A ball-splined shaft features a nut with recirculating balls. The ball-splined nut rides in these grooves to provide linear motion while preventing rotation. A splined shaft with a nut that has recirculating balls can also provide rotary motion. A ball splined shaft also has higher load capacities than a ball bushing. For these reasons, ball splines are an excellent choice for many applications.
In this invention, a pair of ball-spinned shafts are housed in a box under a carrier device 40. Each of the 2 shafts extends along a longitudinal line of arm 50. One end of each shaft is supported rotatably by a slide block 56. The slide block also has a support arm 58 that supports the center arm 50 in a cantilever fashion.

Sector no-go gage

A no-go gauge is a tool that checks the splined shaft for oversize. It is an effective way to determine the oversize condition of a splined shaft without removing the shaft. It measures external splines and serrations. The no-go gage is available in sizes ranging from 19mm to 130mm with a 25mm profile length.
The sector no-go gage has 2 groups of diametrally opposed teeth. The space between them is manufactured to a maximum space width and the tooth thickness must be within a predetermined tolerance. This gage would be out of tolerance if the splines were measured with a pin. The dimensions of this splined shaft can be found in the respective ANSI or DIN standards.
The go-no-go gage is useful for final inspection of thread pitch diameter. It is also useful for splined shafts and threaded nuts. The thread of a screw must match the contour of the go-no-go gage head to avoid a no-go condition. There is no substitute for a quality machine. It is an essential tool for any splined shaft and fastener manufacturer.
The NO-GO gage can detect changes in tooth thickness. It can be calibrated under ISO17025 standards and has many advantages over a non-go gage. It also gives a visual reference of the thickness of a splined shaft. When the teeth match, the shaft is considered ready for installation. It is a critical process. In some cases, it is impossible to determine the precise length of the shaft spline.
The 45-degree pressure angle is most commonly used for axles and torque-delivering members. This pressure angle is the most economical in terms of tool life, but the splines will not roll neatly like a 30 degree angle. The 45-degree spline is more likely to fall off larger than the other two. Oftentimes, it will also have a crowned look. The 37.5 degree pressure angle is a compromise between the other 2 pressure angles. It is often used when the splined shaft material is harder than usual.