Tag Archives: machinery making

China Best Sales Pulp Making Double Disc Refiner for Pulp Machinery with Great quality

Product Description

Product Description

The double disc refiner is a continuous beating equipment for the paper pulping system. It has the characteristics of compact structure, small footprint, high efficiency, low power consumption, strong adaptability, simple operation, flexible adjustment, and convenient maintenance. It is the ideal continuous Beating equipment. According to the requirements of the beating process, single or multiple units can be used in series or parallel.

(1) Mainly used for beating pulp to improve the tapping degree of pulp and meet the needs of papermaking.
(2) A variety of tooth-shaped grinding discs can be installed, with a wide range of raw materials, suitable for wood pulp, chemical pulp, chemical pulp, waste paper pulp, etc.
(3) Double grinding zone, high refining efficiency.
(4) High versatility and convenient maintenance

Detailed Photos


Our Advantages

DD series double disc refiner is available for continuous beating section of paper industry. It is available for continuous beating of virgin pulp, chemical wood pulp, mechanical pulp and waste paper pulp.
*Specially designed rotary disc is self aligned automatically under the function of stock.

Advantage :
*According to refining requirement, clearance is adjustable through electromechanical device.

*Special tool for easy and fast change of refiner disc.

*High strength welded structure to ensure stable and reliable operation.

*The beating effect is stable and uniform.

Key Feature

1. Improve the beating degree and wet weigh of pulp. 
2.The equipment is furnished with automatic control system and can beat with constant power or constant energy consumption. 
3.The rotary disc and the main shaft are splined to ensure the pressure balance in the 2 grinding areas.
4.The beating effect is stable and uniform.

Product Parameters

Model ZDP-380 ZDP-400 ZDP-450 ZDP-550 ZDP-600 ZDP-660
Refiner plate dia (mm) 380 400 450 550 600 660
Capacity (T/D) 6-20 7-25 8-40 20-100 30-150 40-200
Inlet Consistency: (%) 2-5
Inlet pressure (Mpa) 0.1-0.3
Inlet pipe dia (mm) 2-65 2-65 2-70 2-90 2-110 2-130
Outlet pipe dia (mm) 80 80 90 100 120 150
Motor Power: (kW) 37 37 90 160-250 200-315 220-500
Main shaft speed 980 980 980 980 980 750


Structure and Principle

This refiner is made up of main body, coupling and feed gear, etc.

1.Main body

The refiner has 2 CZPT sections. By the inclination angle of abrasion pattern, 4 CZPT plates are fixed, 2 left and 2 right. Two left plates are fixed on inner wall of machine shell and inside of rotating disc and 2 right plates are fixed on outside of rotating disc and moving pedestal, forming 2 CZPT sections (see drawing for installation instruction). Stock is conveyed to CZPT section through inlet pipe. After beating and refining, pumped out from the CZPT section and flows into shell, at last discharged from outlet pipe.

There are 2 bearings on the main shaft and fixed by bearing pedestal and connected to motor via coupling by Nylon column pins. The turntable is on the other side of the main shaft. And there are CZPT discs on each end of the turntable, and the turntable rotates between 2 CZPT discs and axially moves under pressure.

Movable pedestal is adjusted by feed gear with axial movement to adjust the space between 2 CZPT sections. A feather key is set between movable pedestal and machine case and pushed by trapezoidal screw.

The cover is a welded structure which is connected with the case by pin roll. Withdraw the whole movable pedestal into the cover and loosen the locking bolts before opening the cover. Keep the surface clean and withdraw the movable pedestal into the cover before closing the cover. Then fix uniformly fasten bolts.


Coupling is connected by Nylon column pin with the character of easy dismounting and maintenance. It meets the requirement of displacement of feeding and relieving and transmit torque

3.Feed gear

Feed gear covers worm gear reduction system. Under force of worm gear, trapezoidal thread screw rotates and drive the movable pedestal forward or backward. The movable pedestal moves 0.23mm for each circle of motor. When rotating clockwise, it moves forward while anticlockwise backward.

Field Usage


Company Profile

Standard Length Splined Shafts

Standard Length Splined Shafts are made from Mild Steel and are perfect for most repair jobs, custom machinery building, and many other applications. All stock splined shafts are 2-3/4 inches in length, and full splines are available in any length, with additional materials and working lengths available upon request and quotation. CZPT Manufacturing Company is proud to offer these standard length shafts.

Disc brake mounting interfaces that are splined

There are 2 common disc brake mounting interfaces, splined and center lock. Disc brakes with splined interfaces are more common. They are usually easier to install. The center lock system requires a tool to remove the locking ring on the disc hub. Six-bolt rotors are easier to install and require only 6 bolts. The center lock system is commonly used with performance road bikes.
Post mount disc brakes require a post mount adapter, while flat mount disc brakes do not. Post mount adapters are more common and are used for carbon mountain bikes, while flat mount interfaces are becoming the norm on road and gravel bikes. All disc brake adapters are adjustable for rotor size, though. Road bikes usually use 160mm rotors while mountain bikes use rotors that are 180mm or 200mm.

Disc brake mounting interfaces that are helical splined

A helical splined disc brake mounting interface is designed with a splined connection between the hub and brake disc. This splined connection allows for a relatively large amount of radial and rotational displacement between the disc and hub. A loosely splined interface can cause a rattling noise due to the movement of the disc in relation to the hub.
The splines on the brake disc and hub are connected via an air gap. The air gap helps reduce heat conduction from the brake disc to the hub. The present invention addresses problems of noise, heat, and retraction of brake discs at the release of the brake. It also addresses issues with skewing and dragging. If you’re unsure whether this type of mounting interface is right for you, consult your mechanic.
Disc brake mounting interfaces that are helix-splined may be used in conjunction with other components of a wheel. They are particularly useful in disc brake mounting interfaces for hub-to-hub assemblies. The spacer elements, which are preferably located circumferentially, provide substantially the same function no matter how the brake disc rotates. Preferably, 3 spacer elements are located around the brake disc. Each of these spacer elements has equal clearance between the splines of the brake disc and the hub.
Spacer elements 6 include a helical spring portion 6.1 and extensions in tangential directions that terminate in hooks 6.4. These hooks abut against the brake disc 1 in both directions. The helical spring portion 5.1 and 6.1 have stiffness enough to absorb radial impacts. The spacer elements are arranged around the circumference of the intermeshing zone.
A helical splined disc mount includes a stabilizing element formed as a helical spring. The helical spring extends to the disc’s splines and teeth. The ends of the extension extend in opposite directions, while brackets at each end engage with the disc’s splines and teeth. This stabilizing element is positioned axially over the disc’s width.
Helical splined disc brake mounting interfaces are popular in bicycles and road bicycles. They’re a reliable, durable way to mount your brakes. Splines are widely used in aerospace, and have a higher fatigue life and reliability. The interfaces between the splined disc brake and BB spindle are made from aluminum and acetate.
As the splined hub mounts the disc in a helical fashion, the spring wire and disc 2 will be positioned in close contact. As the spring wire contacts the disc, it creates friction forces that are evenly distributed throughout the disc. This allows for a wide range of axial motion. Disc brake mounting interfaces that are helical splined have higher strength and stiffness than their counterparts.
Disc brake mounting interfaces that are helically splined can have a wide range of splined surfaces. The splined surfaces are the most common type of disc brake mounting interfaces. They are typically made of stainless steel or aluminum and can be used for a variety of applications. However, a splined disc mount will not support a disc with an oversized brake caliper.

China Best Sales Pulp Making Double Disc Refiner for Pulp Machinery     with Great qualityChina Best Sales Pulp Making Double Disc Refiner for Pulp Machinery     with Great quality