OE NO.: 46448513
Model: MULTIPLA (186_), BRAVA (182_), PALIO (178_), BRAVO I (182_)
Year: 1995-2, 832781, AW4708, 12341375, 312861, 1238, VN5455, 18341571, 14431, PDS7905
Warranty: 2 a long time
Auto Product: for Fiat
Measurement: OE Common
Type: Internal C.V.Joint
Hardness: HRC56-62
depth of carburizing: .8-1.2mm
Check strategies: hardness test/spline measurement check
Certificate: TS16949
MOQ: oneWidth [mm]31,75Overall Duration [mm]50,00Width 1 [mm]23, Cast iron common transmission hydraulic couplers drive shaft coupling 45Bolt Ø 1 [mm]11,00Int.enamel, diff.side22Warranty2 many yearsDiameter 1 [mm]22,25MOQ100 PiecesTripod Roller Diameter [mm]31,ninety fivePortHangZhou/ZheJiang Specifications1. Far more than 1500 distinct items2 .Market market is Usa and European market3. Provide some of OE factories4. 2 Many years high quality guarantee5. a hundred% Inspection before shipment
About Tripod Joint Tripod Joint is employed at the inboard stop of auto driveshafts, it permits electricity transmission even in situation of angle shifting. Tripod Joint has needle bearing / barrel-shaped rollers mounted on a a few-legged spider / three-pointed yoke, alternatively of balls bearings. These fit into a cup with 3 matching grooves, attached to the differential. The rollers are mounted at one hundred twenty-degrees to 1 yet another and slide back and forth in tracks in an outer “tulip” housing.This a few-legged spider with tripod has only minimal functioning angles, but is CZPT to plunge in and out with a for a longer time length as the suspension moves. A standard Tripod joint has up to fifty mm of plunge journey, and 26 degrees of angular articulation.
Thorough Picture Spider: Tripod spider transfers the engine energy at numerous angles.Ball situation: Ball case(Spherical roller) being assembled into housing make stroke actions at various angles within housing monitor as wheel rolls.Needle rollers: Needle rollers assembled into ball situation smooths spider motion.Ring: Ring currently being assembled into spider groove retains surrounding areas.Retainer: Retainer currently being assembled CZPT spider holds parts in position.
Tests and Firm Hohan Auto Areas Co., Ltd. is a expert vehicle components and add-ons maker, supplier and exporter. Hohan aims to supply globally customers with a broad range of greatest quality merchandise with most competitive prices. In get to achieve this objective, Vigor Peek Worm Pet Worm Gearbox Robotic Vacuum Cleaner Gearbox Mechanical Gearbox Hohan has recognized stringent top quality handle, inspection, best administration and excellent provide method.To make certain the high quality of our items, all our factories make car components strictly to IS9001/TS16949 top quality certification.
Other Merchandise Cv Joint
Universal Clamp
ABS Sensor
Packing & Shipping Our Services one. OEM Manufacturing welcome: Item, Package… 2. Sample purchase 3. We will reply you for your inquiry in 24 hours.4. soon after sending, we will observe the goods for you once every single 2 days, right up until you get the items. When you got the goods, take a look at them, and give me a opinions.If you have any questions about the difficulty, contact with us, we will offer you the solve way for you.
FAQ Q1. What is your phrases of packing?A: Usually, we pack our merchandise in neutral white boxes and brown cartons. If you have lawfully registered patent, we can pack the merchandise in your branded boxes after receiving your authorization letters. Q2. What is your terms of payment?A: T/T 30% as deposit, and 70% just before shipping and delivery. We are going to display you the photographs of the goods and packages prior to you spend the equilibrium. Q3. What is your phrases of supply?A: EXW, FOB, CFR, CIF, DDU. This fall. How about your shipping and delivery time?A: Usually, it will just take thirty to 60 days following receiving your advance payment. The specific delivery time depends on the objects and the amount of your get. Q5. Can you produce in accordance to the samples?A: Of course, we can generate by your samples or complex drawings. We can develop the molds and fixtures. Q6. What is your sample plan?A: We can offer the sample if we have prepared parts in stock, but the consumers have to spend the sample value and the courier value.Q7. Do you take a look at all your merchandise prior to shipping and delivery? A: Of course, we have 100% take a look at before shipping and delivery Q8: How do you make our company lengthy-term and excellent partnership?A:1. We maintain great quality and competitive cost to guarantee our clients reward 2. We respect every single buyer as our good friend and we sincerely do organization and make pals with them, no issue exactly where they arrive from.

Types of Splines

There are four types of splines: Involute, Parallel key, helical, and ball. Learn about their characteristics. And, if you’re not sure what they are, you can always request a quotation. These splines are commonly used for building special machinery, repair jobs, and other applications. The CZPT Manufacturing Company manufactures these shafts. It is a specialty manufacturer and we welcome your business.

Involute splines

The involute spline provides a more rigid and durable structure, and is available in a variety of diameters and spline counts. Generally, steel, carbon steel, or titanium are used as raw materials. Other materials, such as carbon fiber, may be suitable. However, titanium can be difficult to produce, so some manufacturers make splines using other constituents.
When splines are used in shafts, they prevent parts from separating during operation. These features make them an ideal choice for securing mechanical assemblies. Splines with inward-curving grooves do not have sharp corners and are therefore less likely to break or separate while they are in operation. These properties help them to withstand high-speed operations, such as braking, accelerating, and reversing.
A male spline is fitted with an externally-oriented face, and a female spline is inserted through the center. The teeth of the male spline typically have chamfered tips to provide clearance with the transition area. The radii and width of the teeth of a male spline are typically larger than those of a female spline. These specifications are specified in ANSI or DIN design manuals.
The effective tooth thickness of a spline depends on the involute profile error and the lead error. Also, the spacing of the spline teeth and keyways can affect the effective tooth thickness. Involute splines in a splined shaft are designed so that at least 25 percent of the spline teeth engage during coupling, which results in a uniform distribution of load and wear on the spline.

Parallel key splines

A parallel splined shaft has a helix of equal-sized grooves around its circumference. These grooves are generally parallel or involute. Splines minimize stress concentrations in stationary joints and allow linear and rotary motion. Splines may be cut or cold-rolled. Cold-rolled splines have more strength than cut spines and are often used in applications that require high strength, accuracy, and a smooth surface.
A parallel key splined shaft features grooves and keys that are parallel to the axis of the shaft. This design is best suited for applications where load bearing is a primary concern and a smooth motion is needed. A parallel key splined shaft can be made from alloy steels, which are iron-based alloys that may also contain chromium, nickel, molybdenum, copper, or other alloying materials.
A splined shaft can be used to transmit torque and provide anti-rotation when operating as a linear guide. These shafts have square profiles that match up with grooves in a mating piece and transmit torque and rotation. They can also be easily changed in length, and are commonly used in aerospace. Its reliability and fatigue life make it an excellent choice for many applications.
The main difference between a parallel key splined shaft and a keyed shaft is that the former offers more flexibility. They lack slots, which reduce torque-transmitting capacity. Splines offer equal load distribution along the gear teeth, which translates into a longer fatigue life for the shaft. In agricultural applications, shaft life is essential. Agricultural equipment, for example, requires the ability to function at high speeds for extended periods of time.

Involute helical splines

Involute splines are a common design for splined shafts. They are the most commonly used type of splined shaft and feature equal spacing among their teeth. The teeth of this design are also shorter than those of the parallel spline shaft, reducing stress concentration. These splines can be used to transmit power to floating or permanently fixed gears, and reduce stress concentrations in the stationary joint. Involute splines are the most common type of splined shaft, and are widely used for a variety of applications in automotive, machine tools, and more.
Involute helical spline shafts are ideal for applications involving axial motion and rotation. They allow for face coupling engagement and disengagement. This design also allows for a larger diameter than a parallel spline shaft. The result is a highly efficient gearbox. Besides being durable, splines can also be used for other applications involving torque and energy transfer.
A new statistical model can be used to determine the number of teeth that engage for a given load. These splines are characterized by a tight fit at the major diameters, thereby transferring concentricity from the shaft to the female spline. A male spline has chamfered tips for clearance with the transition area. ANSI and DIN design manuals specify the different classes of fit.
The design of involute helical splines is similar to that of gears, and their ridges or teeth are matched with the corresponding grooves in a mating piece. It enables torque and rotation to be transferred to a mate piece while maintaining alignment of the two components. Different types of splines are used in different applications. Different splines can have different levels of tooth height.

Involute ball splines

When splines are used, they allow the shaft and hub to engage evenly over the shaft’s entire circumference. Because the teeth are evenly spaced, the load that they can transfer is uniform and their position is always the same regardless of shaft length. Whether the shaft is used to transmit torque or to transmit power, splines are a great choice. They provide maximum strength and allow for linear or rotary motion.
There are three basic types of splines: helical, crown, and ball. Crown splines feature equally spaced grooves. Crown splines feature involute sides and parallel sides. Helical splines use involute teeth and are often used in small diameter shafts. Ball splines contain a ball bearing inside the splined shaft to facilitate rotary motion and minimize stress concentration in stationary joints.
The two types of splines are classified under the ANSI classes of fit. Fillet root splines have teeth that mesh along the longitudinal axis of rotation. Flat root splines have similar teeth, but are intended to optimize strength for short-term use. Both types of splines are important for ensuring the shaft aligns properly and is not misaligned.
The friction coefficient of the hub is a complex process. When the hub is off-center, the center moves in predictable but irregular motion. Moreover, when the shaft is centered, the center may oscillate between being centered and being off-center. To compensate for this, the torque must be adequate to keep the shaft in its axis during all rotation angles. While straight-sided splines provide similar centering, they have lower misalignment load factors.

Keyed shafts

Essentially, splined shafts have teeth or ridges that fit together to transfer torque. Because splines are not as tall as involute gears, they offer uniform torque transfer. Additionally, they provide the opportunity for torque and rotational changes and improve wear resistance. In addition to their durability, splined shafts are popular in the aerospace industry and provide increased reliability and fatigue life.
Keyed shafts are available in different materials, lengths, and diameters. When used in high-power drive applications, they offer higher torque and rotational speeds. The higher torque they produce helps them deliver power to the gearbox. However, they are not as durable as splined shafts, which is why the latter is usually preferred in these applications. And while they’re more expensive, they’re equally effective when it comes to torque delivery.
Parallel keyed shafts have separate profiles and ridges and are used in applications requiring accuracy and precision. Keyed shafts with rolled splines are 35% stronger than cut splines and are used where precision is essential. These splines also have a smooth finish, which can make them a good choice for precision applications. They also work well with gears and other mechanical systems that require accurate torque transfer.
Carbon steel is another material used for splined shafts. Carbon steel is known for its malleability, and its shallow carbon content helps create reliable motion. However, if you’re looking for something more durable, consider ferrous steel. This type contains metals such as nickel, chromium, and molybdenum. And it’s important to remember that carbon steel is not the only material to consider.

editor by czh 2023-02-15